6x2 Fuel Savings Average 2.5% in Track and Fleet Tests, NACFE Study Finds
January 22, 2014
The 6x2 configuration with a single drive axle in its rear tandem is likely to save highway truck operators an average of 2.5% in fuel compared to the dual-drive 6x4 that currently dominates the market, says a report of a study released Tuesday by the North American Council for Freight Efficiency.
The study, which involved axle and truck manufacturers and five large fleets, also found that fuel savings would pay back the costs involved with acquiring 6x2 systems in about 20 months.
Current upcharges of $1,000 to $2,000 per vehicle are likely to disappear with volume production if many fleets switch to 6x2 truck-tractors, and residual values would probably increase as their monetary benefits became better known.
Lack of traction with two drive wheels instead of four – a common fear among drivers and owners - can be managed with controls that shift weight from the 6x2 tandem’s “dead” axle to its “live” drive axle, says the report, “Confidence Findings on the Potential of 6x2 Axles.” Weight-shifting mechanisms should “automatically” be chosen with any 6x2 purchases, NACFE recommends.
One negative finding involves tire life.
“Some in the industry assume that the driven tires of a 6x2 will wear twice as fast as the tires on a 6x4, since only half as many tires are providing thrust,” the study states.
“But data from tire manufacturers and several fleets indicates that the useable tire life on a 6x2 drive axle is actually about one third that of the 6x4 drive tires.”
Loss of 6x2 drive-tire life can be offset by using less costly trailer tires on the dead axle, the report says. Trailer tires usually offer lower rolling resistance than drive tires, which will save a bit more fuel.
Dana Holdings Corp. and Meritor Inc., which build truck axles and offer 6x2 as well as 6x4 drive tandems, sponsored the study and supplied much data for it, said NACFE's executive director, Mike Roeth. But they did not bias the study's findings for or against 6x2s.
Further support came from Bridgestone Corp., Michelin North America Inc., and Performance Innovation Transport-FP Innovations.
The report says an NACFE contractor ran track tests using two Kenworth tractors with Dana axles and a Volvo with Meritor axles, which with 6x2 axles together saved 2.3% in fuel after being modified from a 6x4 configuration.
It cites findings in tests by Daimler Trucks using a Freightliner Cascadia tractor and Volvo Trucks using Volvo VN that together got 1.9% better economy when converted to 6x2s from 6x4s.
Results of in-service, on-highway testing by five fleets yielded better results – an aggregate economy gain of 3.5% -- the study found.
Those tests, which also pitted 6x2s against 6x4s, included Kenworths operated by Con-way Truckload, Macks run by United Parcel Service, Volvos run by Nussbaum Transportation, and Freightliners and Internationals run by two fleets that wished to remain anonymous.
Duration of each fleet test ranged from one to 12 months.
Averaging the economy gains of the three test groups – NACFE contractor, truck manufacturers and fleets – yielded the 2.5% stated in the study’s conclusions. Readers should consider the operations of the participating fleets, which are described within the report, in deciding which results might be closest to what they might see, NACFE says.
“Given all the data in this report, Trucking Efficiency [NACFE] predicts a rather aggressive adoption of 6x2 axles on new truck production over the next few years, possibly doubling every year: 2% in 2013, 4% in 2014, 8% in 2015 and 16% in 2016,” the report states.
Greater popularity in coming years will gradually raise resale values of 6x2 tractors, so fleets wanting to convert to them should consider lengthening their trade cycles to capture some of that dollar increase.
The report also recommends that drivers be trained to properly operate the equipment, and that fleets should go all-out in a conversion so drivers, mechanics and other employees get accustomed to the new fleet spec.
The complete report can be downloaded at www.nacfe.org/projects.