Fleet Management

Panel: Trailers Next Frontier in Telematics

The power of telematics continues to advance, and there are still plenty of opportunities to be realized – especially when it comes to the rolling assets seen in a rearview mirror.

September 2017, TruckingInfo.com - Feature

by John G. Smith

SHARING TOOLS        | Print Subscribe
“The trailer is very much increasing in importance.” says Wabco's Jon Morrison. Photo: Deborah Lockridge
“The trailer is very much increasing in importance.” says Wabco's Jon Morrison. Photo: Deborah Lockridge

ATLANTA, GA – The power of telematics continues to advance, and there are still plenty of opportunities to be realized – especially when it comes to the rolling assets seen in a rearview mirror.

It’s why Utility Trailer’s Intelligent Trailer Symposium, held during the North American Commercial Vehicle Show, gathered a panel of high-profile executives to explore the promises and challenges of collecting, sharing, and using trailer-related data.

“We do spend a lot of time talking about trucks,” said Jon Morrison, Wabco’s president – Americas. “The trailer is very much increasing in importance.”

The interest in data clearly involves more than filling spreadsheets and completing reports. Wabco has a boat tail that deploys and retracts at specific speeds based on data from existing antilock braking systems. Retreading programs can track the condition of individual tires equipped with RFID tags. Reefer settings can be monitored and changed remotely. Those are just a few examples.

“The demand for data is increasing everywhere,” said Berend Bracht, president and CEO of Bendix.

While the traditional focus has been on collecting the data because of an exception or unusual situation, like a fault code or collision, the possibilities that can be realized by analyzing “big data” will require a continuous stream of bits and bytes.

More data can be a good thing, but it presents new challenges to address. Will information collected about a trailer, for example, come from wired or wireless sensors? How will it ultimately be packaged and transmitted to drivers and operation teams? “There’s a lot of data, but who gets that data?” Bracht asked, referring to one fundamental question.

“One of the biggest issues that still exists for fleets is light outage(s),” explained Dominic Grote, president and CEO of Grote Industries. Drivers need to be notified if lights go dark, but so do maintenance teams. And there is plenty of underlying information to track. The largest entry in the U.S. Federal Register is FMVSS 108, he observed, which dictates the many standards lights have to meet.

Utility Trailer’s Intelligent Trailer Symposium gathered a panel of high-profile executives to explore the promises and challenges of collecting, sharing, and using trailer-related data. Photo: Deborah Lockridge
Utility Trailer’s Intelligent Trailer Symposium gathered a panel of high-profile executives to explore the promises and challenges of collecting, sharing, and using trailer-related data. Photo: Deborah Lockridge

When establishing telematics systems, there is also the question of how quickly people need to receive information, said David Kiefer, director of sales, marketing and product management for Carrier Transicold. One warning might require a driver’s immediate attention, but if reefer temperatures begin to fluctuate, it might be better to inform other fleet personnel who have the tools to make adjustments remotely. Drivers no longer have to be part of that equation.

Too much data, after all, can be overwhelming to those sitting behind the wheel. “We have to think in terms of what we do to enable the driver just to drive the truck,” he said.

As advances are made toward different levels of autonomous trucks, it becomes increasingly important to consider the entire vehicle combination, Morrison added. Platooning offers a prime example here. “This is where we need to really understand and qualify the vehicles that are coming together, and this is where data sensing and data transmission becomes quite important,” he said. As the lead vehicle in a tightly spaced platoon applies the brakes, the following vehicles almost instantaneously have to know what’s happening and trigger brakes of their own.

The ever-increasing streams of data might demand a new electrical connector between tractors and trailers, suggested Rob Phillips, president and chief operating officer of Phillips Industries. Equipment used to support the latest round of emissions standards will present the need for additional circuits, he said. “The J560 we’re using right now is very much overloaded.”

It could call for something like the 15-pin connectors used in Europe. “That’s a better solution – to have two connectors there,” he said, citing the example of installing multiple cameras around a trailer to feed screens in a cab. Each camera requires two wires, with the twisted pairs offering the best signals.

“The reality is, we’ve got potentially a lot of data going back and forth.”

Systems on the trailer itself could generate some of the required power, added Beto Dantas, ConMet’s vice president – marketing, strategy and innovation, referring to his company’s electric hub that generates power by electrifying wheel hubs. Then there’s the matter of how the power is ultimately used, maybe to assist fuel economy. The ultimate application could vary by fleet. “You can actually create something that’s customizable,” he said.

Dantas also called on manufacturers to collaborate more closely when developing different systems, stressing that it would expedite the rollouts of different technologies.

The ultimate goal would be cost-effective systems that talk to each other with a single bill for the airtime, all through a single dashboard, Kiefer said. With many suppliers coming and going in the world of telematics, the interest in systems that are backed by original equipment manufacturers also begins to rise.

“You see a lot of people and a lot of manufacturers offering new and unique things that really add value to fleets,” he said, referring to the opportunities to share the pipeline of data heading back to fleet offices. “The question becomes, how do you integrate that? It’s where the next stage of the value chain begins.”

“Fleets don’t want to have a dozen boxes on the front of their trailer,” Phillips agreed. “The way we can do that is by collaborating.”

This content appears through an editorial sharing agreement with Today's Trucking, an award-winning Canadian trucking publication.

Comment On This Story

Name:  
Email:  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.

GotQuestions?
sponsored by
sponsor logo

ELDs and Telematics

Scott Sutarik from Geotab will answer your questions and challenges

View All
GotQuestions?

Sleeper Cab Power

Steve Carlson from Xantrex will answer your questions and challenges

View All