Fleet Management

Truck Buying Options: New, Used, Buy or Lease

Many choices await you if you’re looking to acquire hauling equipment.

January 2014, TruckingInfo.com - Feature

by Tom Berg, Senior Contributing Editor - Also by this author

SHARING TOOLS        | Print Subscribe

What’ll it be, buddy? New or used? Buy or lease? A salesperson could throw those questions at a prospective buyer and get a combination of answers, and none of them would be absolutely wrong. Because like everything in trucking, “it depends.”

The choice has become more critical since the cost of a new over-the-road tractor has climbed to well over $100,000 and a midrange truck can be $75,000 or more. Manufacturers blame the price increases on government safety and exhaust-emissions requirements, and on inflation of the costs of materials used in building the complex vehicles.

New or used?

Why buy a new truck? “Low maintenance and less downtime,” says J.P. Heineman, a salesman at Truck Country’s Cedar Rapids, Iowa, location. “Downtime – that’s number one. A half a million-mile used truck might still be OK, but you get to 600,000, 700,000, 800,000 miles, and that’s when things start nickel and diming you.”

The cost of purchasing is higher, but your maintenance cost is much lower with a new truck, he says. New trucks have the latest technology that can save on fuel and other operating costs and help avoid accidents, as well as clean up the environment. The selective catalytic reduction now used by all heavy-duty diesel engine makers deals with nitrogen oxide in the exhaust and takes stress out of the engine.

But choosing new or used “depends on the customer and on the application,” Heineman says. For instance, he says, someone who doesn’t want to deal with diesel exhaust fluid will have to buy used. A key factor is mileage.

Good used trucks cost substantially less than new and can perform well.
But research their reputations before buying.
Good used trucks cost substantially less than new and can perform well.But research their reputations before buying.

“If the customer is contemplating new or used, and he runs a lot of miles and has the means to go new, I’m putting him in a new truck. If a customer is putting 2,000 miles a year on the truck hauling crops out of his 180 acres, and then he parks it for 10 months of the year, he should buy used.”

You can’t beat used trucks on price, he says. “You can get two for one – that’s probably the biggest advantage. If you’re buying used trucks, your overhead is not near what it is when you buy new.”

Just be sure you have the trucks in the proper application – primarily, that your operation is the same or close to what the truck was originally built for.
“There have been some discouraging times with some of the emissions things we’ve had to contend with,” Heineman says. “But things have begun to turn around. The air coming out of the exhaust is as clean as can be. It just takes a lot of sensors to make it.” New engines with EPA-2010 emissions get better fuel economy than the EPA-2007 engines, he points out.

What makes, models and specifications are good bets when buying used?

Penn Commercial Vehicle Solutions in Glenmore, Pa., with 13 other locations in three states, works on all kinds of trucks. Hank Grahn, sales director for fleet maintenance, also notes the fuel-efficiency benefits of newer equipment. The new trucks are also more reliable.

However, he says, “There’s certainly a risk involved in buying equipment from ’07 and later. It’s viable, but you have to go in with your eyes open, you have to do your homework. Just because a vehicle has low mileage doesn’t mean it’s a creampuff. It might be low mileage because it’s been troublesome.”

In deciding which used models might be the best buy, Grahn recommends talking to the people who service and repair them for a living. And talk to customers who use them.

The Internet is also a good tool, he says. “Not everything is true, but there’s a lot of data out there that’s in the public domain.”

There’s actually an alternative to new and used trucks, and it’s the glider kit.


  1. 1. abdurazak saisu [ February 05, 2014 @ 02:08AM ]

    i ned tipa trock

  2. 2. sam [ April 05, 2016 @ 04:16AM ]

    I need 12 trucks flat back including 1 8 run please help me

  3. 3. Kiro [ October 29, 2016 @ 08:28PM ]

    My choice will be always Used truck. The new trucks has much more electronic and sensors . You will spend more money for Def than save from your APU . And if you are not huge company where to get big discount when buy new truck or some company where don't care about your profit because wash somebody's money than you need Used truck if you wont to survive. I recommend Volvo engine where can go easy to 1.4 million miles before rebuilt it. If you don't go to California buy it before 2008 model so you can get the best engine with less maintenance and better fuel economy without $2000 to $4000 the cost for DEF. Good luck

  4. 4. Jenna Hunter [ December 21, 2016 @ 09:51AM ]

    It was eye opening to know that if one parks it for 10 months of the year, then one should buy a used one. My dad wanted to buy a new semi to rent to drivers. And ended up losing a bunch of money in the process. When looking for one we will be sure to keep this in mind! http://www.arrowtruck.com/docs/used-freightliner-trucks.aspx


Comment On This Story

Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.


We offer e-newsletters that deliver targeted news and information for the entire fleet industry.


ELDs and Telematics

sponsored by
sponsor logo

Scott Sutarik from Geotab will answer your questions and challenges

View All

Sleeper Cab Power

Steve Carlson from Xantrex will answer your questions and challenges

View All