Related: Automated Manuals: A Success Story
Daimler Trucks Predicting Another Banner Year
The North American truck market continues to heat up, exceeding expectations, said Daimler Trucks North America head Martin Daum in a press briefing at the Mid-America Trucking Show -- and demand for the DT12 automated manual has far exceeded even Daum's optimistic goals.
The North American truck market continues to heat up, exceeding expectations, said Daimler executives in a press briefing at the Mid-America Trucking Show Thursday evening.
Daimler Trucks achieved its growth and EBIT targets in 2014 and executives anticipate more growth in 2015. In North America, on top of a strong truck sales environment, the DT12 automated transmission has seen sales more than double the company's initial forecasts, which at the time were considered optimistic.
Globally, Daimler Trucks sold 496,000 trucks last year, up 2% from 2013. The biggest market was Asia, with 167,000 units, followed closely by the NAFTA region at 161,000. DTNA President and CEO Martin Daum quipped to reporters, "because we are very competitive here in NAFTA, we will erase that little deficit in 2015."
And that's likely doable, he said, because "at the moment, the U.S. is one of the few really strong markets in the world."
Western Europe saw sales of 57,000 and Latin America sales of 47,000, both down from 2013 numbers.
In the North American, or NAFTA, region, Daimler projects that 2015 Class 6-8 sales will hit at least 411,000, up 10% from last year. Year-to-date they are up 18%, so even though the second part of the year is expected to slow down a bit, Daum told reporters candidly he believes it will be higher than 10%. Class 6-8 sales ended the year at 384,000 in the NAFTA region.
The U.S. Class 8 market is the biggest driver of those gains. The market hit 220,000 in 2014, up 19% from the previous year. Noting that year to date sales are up 25%. Daum believes 2015 will be up just as much as 2014, if not more.
The Class 6-7 market ended the year better than expected, up 12%, and Daimler projects this year it will be up 6%.
DTNA started the year with strong market share, 42.8% year to date for U.S. Class 6-8, up 4.3%, and 41.4% for NAFTA Class 6-8, up 4.4%.
Noting that Germans tend to look at things a little differently from Americans, Daum (who is originally from Germany himself) joked, "If you ask me how is the market these days, a typical German answer is 'not bad,' which in English means 'awesome.'"
Referring to market share, he added, "The head start we had into this year and seeing what we have in upcoming months is very encouraging."
Daimler saw the boom coming last year and has increased production by 16% over 2014, adding capacity for another 27,000 units and hiring 2,300 production workers since last summer. "There is no fear those production slots will go empty; in fact I have the feeling it might not be enough."
Saying it is a nice problem to have, Daum noted plants have been running overtime and weekends to meet the needs of customers. "In the engine plants the only day we didn't work was Christmas day."
Calling it "a history-making success story," Daum showed a chart comparing the initial planned sales of the Detroit DT12 automated transmission when they announced it back in 2012. In 2014, projections called for 6,000 transmissions and 15,000 were actually sold. Projections for this year – and essentially the plant capacity is already sold out for the rest of 2015 – are more than three times the initial projection of 9,000.
In 2012, Daum told reporters he was "on a mission to convert the North American truck market to automated manual transmissions."
"When we announced it, nobody believed it," Daum said in Louisville Thursday, adding that the capacity of the Detroit plant might not be enough, but that Daimler has a global network it can turn to. "The sky is the limit with the Detroit transmission and I am certain you will see higher numbers for the future."
When it comes to greenhouse gas regulations, DTNA said it intends to be the first to announce certification for the GHG2017 standards.
As far as upcoming standards currently in development at the federal level, Daum emphasized the need for a complete vehicle standard vs. having a separate engine-only standard, as well as a test cycle that mimics the real world. DTNA believes mature and feasible technologies need to be used to meet customer expectations of an 18 to 24-month payback.
"We need smart regulations that should support and foster free markets, and fuel efficiency is something where I want a lot of variables we can optimize. The regulations we have at the moment are good and let's hope the future is the same."
More Equipment

Kodiak Lines Up Fleets for Driverless Trucking
An agreement for 75 trucks, a new Texas freight lane, and progress on safety validation move Kodiak closer to its planned driverless highway launch.
Read More →
How GP Transco Builds Fuel Savings a Fraction at a Time
Aerodynamic specs, solar panels, and driver incentives help GP Transco turn small efficiency gains into savings it can reinvest in its people.
Read More →
More Trailer Data Through the Same Seven-Way [Video]
Can trucking’s standard seven-way connector handle more cameras and trailer data? Grote’s Adam Slade shows HDT how the company is using new technology with its 4See trailer system, not only to add a new backup camera but also to expand other capabilities — without adding another connection.
Read More →
Grote: More Cameras, Same Seven-Way Connector
The next-generation 4See rear-view backup camera from Grote uses the standard seven-way connector and supports additional cameras and other trailer data.
Read More →
Trucks at ATA's 2026 MC&E in Charlotte, North Carolina [Photos]
From rigs decked out in patriotic America's 250 paint schemes to autonomous trucks and more, check out these photos from ATA's 2026 Management Conference & Exhibition.
Read More →
Help HDT Find Trucking’s Top Products
Have you come across a new product that could make a difference for trucking fleets? Nominate it for HDT’s 2027 Top 20 Products Awards by November 9.
Read More →
Volvo Unveils New VNX Heavy-Haul and Vocational Truck
Volvo Trucks has launched the VNX, a new vocational truck also available as a tractor in day cab and two sleeper configurations, with one heavy-haul model. The Volvo VNX is powered by Volvo's D13 platform, which delivers up to 540 horsepower and 1,950 pound-feet of torque and is EPA 2027-compliant.
Read More →How GP Transco Cuts Trucking Fuel Costs, a Tenth of a Gallon at a Time
What’s another tenth of a mile per gallon worth? GP Transco shares how equipment upgrades and driver coaching turn small gains into meaningful fuel savings.
Read More →
Electric Yard Tractors Move Beyond Pilots
Operating-cost savings have overtaken sustainability goals as the leading reason surveyed fleets are adopting battery-electric terminal tractors, according to new NACFE research.
Read More →
Continental Introduces New Regional Truck Tires
Continental says its new Generation 5 steer and drive tires for regional operations offer longer tread life, with estimated mileage gains of 22% and 19%, respectively.
Read More →
