SmartTruck said a recent third-party computational fluid dynamics study conducted by CD-adapco showed SmartTruck’s UT6 trailer aerodynamics system reduces drag by more than 10%, translating into highway fuel savings of approximately 7%

SmartTruck said a recent third-party computational fluid dynamics study conducted by CD-adapco showed SmartTruck’s UT6 trailer aerodynamics system reduces drag by more than 10%, translating into highway fuel savings of approximately 7%

ORLANDO (UPDATED)—Officials with SmartTruck fired back at testing results announced a month ago showing trailer undercarriage air deflectors result in fuel savings far less than some manufacturers are claiming.

Speaking to the press during the American Trucking Association’s Management Conference and Exhibition this week, SmartTruck said a recent third-party computational fluid dynamics study conducted by CD-adapco showed SmartTruck’s UT6 trailer aerodynamics system reduces drag by more than 10%, translating into highway fuel savings of approximately 7%.

CD-adapco is the world's largest independent CFD-focused provider of engineering simulation software, support and services, according to SmartTruck, which says the company has more than 30 years of experience in delivering industrial-strength engineering simulation. The full report is expected to be available in November, providing additional analysis and methodology for the study results.

On its website SmartTruck claims a 5.5% fuel saving for its basic UT1 undertray device, and up to a 10.5% improvement for the more elaborate UT6 configuration. However, track tests by Quebec-based Performance Innovation Transport found undercarriage trailer systems offered by SmartTruck and other makers improved fuel economy by no more than 2.2%. 

SmartTruck says the results from CD-adapco are right in line with not only SmartTruck’s internal testing using multiple methods, but also with what “customers are reporting out on the road—even in comparison to other aerodynamic products.”

SmartTruck says it is at the forefront of additional testing methods such as CFD and “coast-down testing” in addition to SAE J1321 testing, as well as using smaller fleets and owner-operators to provide real-world results that it says match up with its many other testing methods.

“Testing is not a perfect process,” said Mike Henderson, chief scientist for SmartTruck, while he was in Orlando. “You have to test many times. You have to take repeat runs. You have to take the average and you have to watch the weather because it will ruin some kinds of testing.”

When asked if SmartTruck has ever worked directly with PIT, he said SmartTruck attempted one test with them but “dropped out of it because they took shortcuts.”

In a separate interview with PIT at the show, Yves Provencher, director of PIT, said that this was actually the second time the group had tested the SmartTruck fairings; the first time was about two years ago, and again the results were less than what SmartTruck had obtained in other testing. PIT, he said, wanted to run the test again to double-check the results.

"We always make sure we run it with stringent proocols," Provencher said, and get confirmation in writing from supplier representatives on-site that devices are installed properly and the test is run as it is supposed to.

Related Story:

On the Road Blog -- A Tale of Two Fuel Tests

About the author
Evan Lockridge

Evan Lockridge

Former Business Contributing Editor

Trucking journalist since 1990, in the news business since early ‘80s.

View Bio
0 Comments