Kenworth's T680: A Home Run Waiting to Happen
When I first saw the T680 on the show floor at the Mid-America Trucking Show, I thought, that's the same as the T700. That truck is only two years old, and I was wondering why the truck maker was introducing its replacement after such a short lifespan

When I first saw the T680 on the show floor at the Mid-America Trucking Show, I thought, that's the same as the T700. That truck is only two years old, and I was wondering why the truck maker was introducing its replacement after such a short lifespan.
I had not heard any serious complaints about that truck, so couldn't see why Kenworth was rolling out another so soon. I wasn't at the press conference, so I hadn't heard the full explanation.
The T680 is not the T700 revisited. Far from it. While they bear some resemblance from a distance, the T680 will appeal to solo drivers who like larger cabs, but not necessarily the barn-like cab of the T700, which is very well suited to team operations. The cab is 83 inches wide, 10 inches more than a T660's, and about eight inches narrower than a T700. There's still 23 inches between the seats for easy access to the 76-inch sleeper.
This truck has all the room any solo driver could ask for and it sure wouldn't leave team drivers wanting.
The most striking thing about the T680 is the quiet. Kenworth claims in its press material there is 40% less interior noise -- compared to what I'm not sure, but its darned quiet.
When I say it's quiet, imagine driving down the highway at cruise speed in the rain, and the loudest sound in the cab is raindrops hitting the windshield. The rain was louder than the engine noise, louder than the road noise, and louder than the virtually absent wind noise.
Actually, the mixture of sounds the driver is exposed to is very nicely balanced. The low growl of the MX engine is clearly obvious, but not intrusive. In fact, it's quite pleasant.
Kenworth has done a lot of stuff right on this truck, from vastly improving the throttle pedal placement, angle and action, to the redesigned dash panel that's both easy to look at a perfectly functional. The larger windshield and narrower A-pillar improve forward and lateral visibility without leaving you feeling that you're sitting in an aquarium.
Driving the truck is a simply a joy. It's easy to maneuver, but very solid feeling. While it smooths out the bumps and jolts, it's not sloppy about it, and you never loose the feeling of where the wheels are on the road.
On the Friday afternoon of the truck show, I had a chance to put about 60 miles on a pair of T680s -- one a day-cab and the other an OTR-spec with the 76- x 96-inch sleeper. While you can't compare the two feature for feature, I can say the day-cab comes closer in comfort and amenities to its larger cousin that most other day-cab to sleeper-cab comparisons I could make.
And there's one development I'm pleased to report, Kenworth and Eaton have spent more than a little time getting the UltraShift transmission and the MX engine talking. The result is a terrific-shifting combo that skips gears as it should when it can, shifts at very low rpm, where it should, and downshifts very smoothly.
We'll have a full report on our T680 test drive in the May issue of Heavy Duty Trucking. But for now, I'll just say the T680 could well become the truck all the others are measured against. The Wow Factor on this one is a solid 10.
More Equipment

Detroit Opens Orders for EPA 2027 Engines
Detroit isn’t starting from scratch to meet EPA 2027 diesel emissions standards. Its Gen 6 DD13 and DD15 engines keep much of today’s platform while updating the fuel and aftertreatment systems.
Read More →
Carrier Transicold Adds All-Electric TRU for Stationary Cold Storage
Carrier Transicold’s new Vector 8200 all-electric transport refrigeration unit gives fleets a diesel-free option for temporary refrigerated and frozen trailer storage.
Read More →A Closer Look at Kenworth’s Electric T880E Vocational Truck [Video]
Learn more about Kenworth's T880E battery-electric vocational truck at the Paccar Technical Center, including its range, applications, upfitting considerations, and PTO options, in this HDT Spotlight video.
Read More →
Kenworth T880E Brings EV Power to Vocational Trucks
A closer look at the Kenworth T880E’s range, charging, powertrain and upfit options — and where fleets are showing the most interest.
Read More →
What the U.S.-Canada Trade War Means for Trucking
Escalating U.S.-Canada tariffs could disrupt cross-border freight, reduce truck volumes, raise costs, and create new uncertainty for carriers on both sides of the border.
Read More →
Autonomous Truck Testing Moves Ahead in California as Teamsters Challenge Rules
California has begun permitting heavy-duty autonomous truck testing, with Aurora and Kodiak among the first to receive approval, as the Teamsters sue the DMV over the new regulations.
Read More →Behind the Wheel of the New Mack Anthem [Video]
HDT takes the new Mack Anthem around Mack’s Pennsylvania test track to see how its driver-focused design, technology, visibility and handling perform from behind the wheel.
Read More →
DTNA Plans New U.S. Truck Plant as Manufacturing Footprint Shifts
Daimler Truck North America is evaluating sites for a new assembly plant expected to open in 2029 while winding down operations at its longtime Portland manufacturing facility.
Read More →
Great Dane Flatbed Trailer Offers Light Weight and Strength
Freedom Ultra is designed for a wide range of open-deck applications, including building materials, lumber, machinery, steel products, industrial freight, and coil hauling.
Read More →
What It's Like Inside this Custom 2025 Peterbilt 589?
Take a driver's-eye tour of this customized 2025 Peterbilt 589 in this video, as longtime driver Ingrid Brown explains its features, compares it to previous models, and shares plenty of personality along the way.
Read More →
