Why Low Cabovers in a Conventional-Cab Market?
Why do the Japan-based importers continue trying to sell low cab-over-engine trucks when North America is conventional-cab territory? The short answer is that LCOEs are what they have to sell

The Mitsubishi Fuso Canter is one of several low-COE trucks coming to North America. (Photo by Tom Berg)
Why do the Japan-based importers continue trying to sell low cab-over-engine trucks when North America is conventional-cab territory? The short answer is that LCOEs are what they have to sell.
The longer answer, gotten in interviews of executives during the NTEA's Work Truck Show in Indianapolis and with others previously, is that Mitsubishi Fuso, Isuzu, and UD have carefully looked at designing and producing conventionals for this market. But they've concluded that potential sales are much too small to justify the expense.
How come it works for Hino? It forsook its low cabovers a decade ago when it introduced a complete line of conventionals. It did well with some of them. Sales went up substantially, and Hino continues to assemble the trucks in the U.S., first in a Toyota-owned plant in southern California and now in a dedicated facility in West Virginia.
But that's for heavier Class 6 and 7 models. Missteps by entrenched domestic competitors in those segments left an opening for Hino, which jumped in with feature-rich and reliable products. However, Hino recently dropped its lighter-duty models. The given reason was that the four-cylinder diesel used in the lighter trucks couldn't meet 2010 emissions limits, but the actual reason is that they sold poorly against domestic trucks.
Hino is bringing back its Class 3-5 Japan-made low COEs to resume competing in those classes. New models, shown at the Work Truck Show, should do well among buyers who favor the cabover. So should new Canter models from Fuso, also unveiled at the WTS, and recently revised LCOEs from Isuzu and UD. Executives of these companies and their dealers are genuinely excited about these products.
All of these builders say they have analyzed the pros and cons of fielding conventionals here, and all reached the same conclusion: While North America is a big market for trucks, established domestic competitors do too good a job with their light- and light-medium models to allow major inroads by the Japanese. Their potential sales would be too small to make major investments worthwhile.
Besides, the Japanese successfully sell their LCOEs almost everywhere else in the world. Producing a few more for the U.S., Canada andMexico makes good sense. And as population continues to grow in the United States, by far the biggest country, congestion in urban areas will get worse. That's where the compactness, maneuverability and easy maintenance of LCOEs gives them a big advantage, and the Japanese are hoping that their sales will rise along with population.
Will LCOE sales increase dramatically? Probably not. For various reasons, most buyers and drivers still prefer North American conventionals. But the Japanese and their American sales and service organizations, which are very lean in structure and staffing, can make some decent money by selling what they have. And that's what they'll continue to do.
More Equipment

How Volvo Updated Its D13 for EPA 2027 [Watch]
Volvo’s updated D13 promises lower emissions without sacrificing performance or fuel economy. Take a closer look at what changed inside the engine in this HDT Spotlight video.
Read More →
Michelin Tire Improves Efficiency and Durability for Regional Fleets
The Michelin X Multi Energy D2 is a regional haul drive tire engineered to help fleets improve fuel efficiency, durability and traction in demanding stop-and-go operations.
Read More →
ZF Expands Commercial Vehicle Push in North America
ZF is expanding its North American commercial-vehicle presence with new transmission applications, electrification, trailer technology and autonomous-driving systems.
Read More →
Tesla Wants a Self-Driving Semi. Are Cameras Enough?
Could Tesla’s camera-only autonomous driving technology work on an 80,000-pound Semi? In this commentary, HDT's Deborah Lockridge takes a look at Tesla, Cybercab, and how autonomous trucks see the road.
Read More →
Kodiak: Driverless Long-Haul Truck Launch on Track for 2026
Kodiak AI says its driverless long-haul safety case is 93% complete and it remains on track to begin commercial operations by year-end 2026.
Read More →
What DOT’s Automated Vehicle Strategy Means for Trucking
The U.S. Department of Transportation issued a new automated-vehicle strategy that outlines plans for driverless-truck regulations, cross-state freight corridors, and federal safety standards.
Read More →
East Coast Port Launches $45M Electric Truck Push
The Port Authority of New York and New Jersey announced millions in incentives for zero-emission drayage trucks, yard tractors, and new charging hubs near the port.
Read More →
PlusAI Going Public to Fund Autonomous Truck Launch
A SPAC deal could provide PlusAI with up to $300 million as it works toward a 2027 commercial launch of factory-built autonomous trucks.
Read More →
NHTSA Moves to Rewrite Truck Fuel-Economy Rules
The National Highway Traffic Safety Administration says it lacks authority to regulate medium- and heavy-duty truck engines separately from complete vehicles, but the existing standards have not yet been eliminated.
Read More →
Detroit Opens Orders for EPA 2027 Engines
Detroit isn’t starting from scratch to meet EPA 2027 diesel emissions standards. Its Gen 6 DD13 and DD15 engines keep much of today’s platform while updating the fuel and aftertreatment systems.
Read More →
