Equipment

Fuel Economy

1  -  7  of  7

July 2014, TruckingInfo.com - WebXclusive

The Peterbilt-Cummins SuperTruck, Part 2: More Secrets Revealed

Cummins ISX15 with waste heat recovery from the front-right side

By Jim Park

The Peterbilt-Cummins SuperTruck project achieved almost-unheard-of gains of 68% in freight efficiency over a 24-hour duty-cycle, a 50% improvement in freight efficiency on an 11-hour drive-cycle and a 20% improvement in the thermal efficiency of the engine. How did they do it, and what does that mean?

Tags: Cummins, SmartWay, Peterbilt, EPA, U.S. Department of Energy, SuperTruck, Engines, Fuel Economy

April 2014, TruckingInfo.com - WebXclusive

MATS Focus: Integrated Drivetrains and Automated Transmissions

The Cummins ISX 15 SmartAdvantage powertrain.

By Rolf Lockwood, Executive Contributing Editor

If there was an unspoken theme to this year's Mid-America Trucking Show, it was probably the focus on integrated drivetrains. And Martin Daum, president and CEO of Daimler Trucks North America, had some interesting things to say about automated transmissions in general.

Tags: Volvo, Cummins, Paccar, Eaton, Fuel Economy, Transmissions, Mid-America Trucking Show, Daimler Trucks North America, Automated Manual Transmissions, Detroit DT12, ZF

March 2014, TruckingInfo.com - WebXclusive

The Lowdown on the New Low-Viscosity Oils

Kinematic viscosity is what you might envision when thinking of viscosity – gravitational flow. But the new oils will meet viscosity standards measured at high temperatures/high shear conditions.

By Deborah Lockridge

Exactly what is this "high-temp, high-shear" viscosity engine oil standard in the works for the next round of EPA emissions standards, and what are engine makers doing to make sure engines will still be well protected?

Tags: Fuel and Oil, Engines, Fuel Economy, GHG emissions, Engine Oil, TMC, API

March 2014, TruckingInfo.com - Cover Story

2014 Truck Fleet Innovators: Transforming Trucking

By Deborah Lockridge

Each year, Heavy Duty Trucking honors a handful of the country’s most forward-thinking fleet executives with the title of “HDT Truck Fleet Innovator.” Read how this year's winners are using the power of collaboration to spec the best trucks and operate more efficiently -- and profitably.

Tags: Truck Fleet Innovators, HDT Truck Fleet Innovators, Frito-Lay, PepsiCo, Meijer, NFI, Fleets, Fuel Economy, Vehicle Spec'ing, Alternative Fuels & Hybrids, Natural Gas

November 2013, TruckingInfo.com - Cover Story

HDT's Top 50 Green Fleets

By Deborah Lockridge

Green strategies vary greatly depending on the operation. For one company, natural gas might make sense. For another, green might mean solar-powered warehouses. For others, it’s all about fuel-efficient specs and driver training.

Tags: Green Fleets, Alternative-fuel vehicles, Alternative Fuels & Hybrids, Natural Gas, Fuel Economy, MPG, Aerodynamics, Fleets

November 2013, TruckingInfo.com - Feature

Commentary: How Smart is SmartWay?

By Rolf Lockwood, Executive Contributing Editor

Can we depend on the fuel-saving numbers provided by the U.S. Environmental Protection Agency’s SmartWay program? Executive Contributing Editor Rolf Lockwood says he's not so sure, in the aftermath of a recent test results story.

Tags: CARB, EPA SmartWay, Fuel Economy

January 2013, TruckingInfo.com - Feature

Dos and Don'ts when Spec'ing Dry Vans

By Kate Harlow

When you are getting ready to put a dry van trailer out to pasture and begin the process of searching for its replacement, there are many things to consider: maintenance costs, fuel-economy regulations, payload and the weight of the trailer, to name a few. One way to navigate through the maze of options is to follow some tips a few trailer manufacturers shared with us.

Tags: Trailers, Payload, Dry Vans, Capacity, MPG, Fuel Economy

« Previous1Next »

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine