Equipment

Fifth Wheels

1  -  2  of  2

May 2014, TruckingInfo.com - Department

Trailer Maintenance Tips

It’s difficult to find a damaged rear impact guard because owners and drivers know they must be fixed before going on the road. Surface rust and dirt shouldn’t result in a citation, but deeper corrosion and bends might. Every trailer builder’s guard is different, so parts from individual manufacturers must be used in repairs.

By Tom Berg and Jim Park

It’s been 14 years since repairing any trailer’s “ICC bumper” was a simple matter of cutting off the damaged section and welding on a straight piece of angle iron. Most trailers built since Jan. 26, 1998, have been equipped with more complex required rear impact guards that are not only stronger but are designed to absorb shock from a collision.

Tags: Trailers, TMC, Fifth Wheels, Stoughton Trailers, ICC Bumpers, Rear Impact Guards

January 2014, TruckingInfo.com - Department

Trailers: Save Pounds By Looking Down

Pounds can be shed on parts underneath the trailer including landing gear, suspensions, axles and fifth wheels.

By Kate Harlow

As fleets everywhere work on cutting fuel expenses, one strategy is shedding pounds anywhere they can stand to lose them. “Most fleets that are fuel conscientious are weight conscientious. The heavier the unit weighs, the higher cost per mile to operate it."

Tags: Trailers, Reyco Granning, Meritor, Fontaine, Suspensions, JOST, Hendrickson, Fifth Wheels, Axles, SAF-Holland, Landing Gear

« Previous1Next »

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine