Drivers

ATA Truck Tonnage Index Decreased 2.8% in October

November 19, 2013

SHARING TOOLS        | Print Subscribe

The American Trucking Associations’ advanced seasonally adjusted For-Hire Truck Tonnage Index fell 2.8% in October, the first decrease since July. In September, the index was up 0.5%. September’s increase was less than the preliminary 1.4% gain ATA reported on Oct. 22.

In October, the index equaled 124 (2000=100) versus 127.5 in September. October’s level was the lowest since April. Compared with October 2012, the SA index surged 8%, which is the largest year-over-year gain since December 2011. Year-to-date, compared with the same period in 2012, the tonnage index is up 5.5%.
 
The not seasonally adjusted index, which represents the change in tonnage actually hauled by the fleets before any seasonal adjustment, equaled 133 in October, which was 4.9% above the previous month (126.9).
 
“From May through September, the index surged 3.5%, including only one monthly decrease over that period,” said ATA Chief Economist Bob Costello. “It isn’t surprising for volumes to fall back some after such a good run.”
 
“Despite October’s month-to-month decrease, we saw a very robust year-over-year increase and I’m seeing some good signs out of the trucking industry that suggests the economy may be a little stronger than we think,” he said. “Specifically, the heavy freight sectors, like tank truck, have been helping tonnage this year. But in the third quarter, generic dry van truckload freight saw the best quarterly gains since 2010. I view this positively for the economy. I view it positively for trucking. Now, we have to see if it continues.”

Comment On This Story

Name:  
Email:  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.

GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine