Drivers

Why You Should Consider Wheel Balancing

Can we forget wheel balancing? It wouldn't be the end of the world if you did, but it will probably cost you in tread life and driver complaints.

March 2013, TruckingInfo.com - WebXclusive

by Jim Park, Equipment Editor - Also by this author

SHARING TOOLS        | Print Subscribe

Dynamic balancing is a good way to ensure the tire ans wheel assembly is properly balances. If problems persist, check the hub and drum assembly. (Photo: Jim Park)
Dynamic balancing is a good way to ensure the tire ans wheel assembly is properly balances. If problems persist, check the hub and drum assembly. (Photo: Jim Park)
Powders or liquids inside the tire can produce a dynamically balanced condition when the wheel is in motion, Walenga says. "But you can't do both.

"Once the compound is in the tire, the dynamic balancing machine will try to compensate for the weight of that material, which is always moving inside the tire. You'll never get a proper balance on a machine with something in the tire," he cautions.

ADVERTISEMENT

Powders, Liquids & Rings

These tools have some advantages over traditional tire weights, says Peggy Fisher, tire guru and president of TireStamp.

"One of the advantages to these alternate forms of balancing is that they will adapt to the tire as it changes shape with age," she says. "As rubber wears off the tire, especially if you have irregular wear from some other source, the balancing compounds will compensate for the missing rubber by moving around within the tire. Weights can't do that."  

She also notes that throwing a bag of balancing compound into the tire is less labor intensive than hoisting the tire and wheel onto a balancing machine, but is one a demonstrably better way of balancing a tire? "Both achieve balance well," she says, "but there are other things to consider."

With powder or liquids, you can't always use them over and over again. Some liquids require special disposal. Some are notorious for rusting steel wheels. Some powders can clog valve stems, and if the powder comes in contact with the bead seat area, it can prevent the tire from seating properly.

"Also," she warns, "some powdered materials can clump up and turn into basically rocks if they come into contact with moisture -- which is pretty common in most truckstop tire fill systems. Having those rocks flying around inside the tire can wreck liner."

Fisher says she has also seen good results with the external balancing rings, but she cautions that if the mounting surface of the ring is not hardened steel, they can cause problems with wheel fastener torqueing.  

"Softer metals can compress under torque, which can cause fasteners to loosen over time," she cautions. "Check with the manufacturer to ensure they are using hardened material, or at the very least, make a habit of checking your wheel fastener torque more frequently."

Balancing the System

So far, we have only discussed the tire and wheel. On the truck in real life, you have the hub and brake drum to contend with, each of which could be out of balance. Brake drums, for example, often have weights welded to the drum or cores drilled out to achieve a static balance. But if the weights fly off or the cores fill with dirt, balance comes into question, Walenga says.

"The rings and balancing compounds are an attempt to continuously address balance as the tire rolls, and they'll work in this situation. But a properly balanced tire and wheel assembly bolted onto a properly balanced hub and drum is just as good," he says."

Balancing is usually unnecessary with today's premium tire because of the consistency in manufacturing, but Walenga notes that it's an easy way to tweak or optimize the ride.

"I'd spend my time and money optimizing steer tires because that's where a driver is most likely to feel and see a problem," he says.

And Fisher believes that balancing is cheap insurance against premature tire wear. "In most cases," she says, "if a tire is mounted correctly and balanced it should run okay unless bad things happen to it." 


« Previous  |  1  2  |  Next »

Comments

  1. 1. Jim Barrow [ March 13, 2013 @ 07:27AM ]

    This subject is very important especially to me. Not only should a tire/rim assembly be perfectly balanced, but the brake drums as well. With today's wheel ends being hub-piloted, many shops take for granted that wheel ends are always balanced but they're not. Piloted hub flanges wear down over time causing the brake drum and wheel assembly to rotate out of round causing poor braking, vibrations, driver fatigue, and equipment/tire failure. As an O/O and self repair tech, I installed Centramatic's and Tru-Balance wheel centering stud pilots to my wheel ends and now all brake drums are perfectly centered and wheel ends balanced. I have no unusual tire wear patterns anymore, and can control the steering with one finger on the steering wheel. These products are not cheap but together they guarantee perfectly balance and excellent tire/brake wear. The big shops said I was wasting my money, but in reality they are upset because I found a way to keep them out of my pockets.

 

Comment On This Story

Name:  
Email:  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by

Magazine