Tires & Wheels: 5 Ways to Stretch Your Tire Budget
Get more miles for your money without putting more money into your miles
January 2013, TruckingInfo.com - Feature
Reduce, reuse, retread
A prime, name-brand tire casing is worth about $100 in today's market. An imported no-name casing costs money to haul away. A carefully managed retreading program can get you up to five retreads (more likely three) which extends the per-mile part of the tire lifecycle calculation considerably.
You might get 80,000 miles out of a $300 tire, but half a million miles or more out of a $500 tire that can be retreaded a few times. Which is the better value?
“Name brand tires are always your best bet,” says Matt King of King's Tire Service in Bluefield, W.Va. “We suggest the first cap on a name brand casing should be a drive recap, and then go to the trailer tread if the casing comes back again. Many of the import casings are not wide enough for a drive tread and can only be used in a trailer application.”
King says some of his over-the-road customers are averaging three to four retreads in a casing life. With a little care and a lot of attention to inflation pressure, a good casing may even go two rounds in a drive position.
To get maximum safe life from a tire, Bridgestone suggests running a tire down to about 6/32 before retreading. We say “safe life” because a thinner tread is less resistant to punctures and stone-drilling, which can damage the casing.
Since the tread will all be buffed off at the retreader, there's no value in turning the tire in prematurely.
“You want maximum mileage out of the tread before sending it off to be retreaded, but you don't want to risk casing damage by pushing it too far,” says Guy Walenga, Bridgestone's director of engineering for commercial products and technologies. “Your retreader can advise you on optimum mileage-to-pull based on your casing damage history and the type of operating environment.”
Bridgestone advises running a drive tire down to about 12/32, and then moving it to a trailer position. It has been found that trailer tires run out more slowly than drive tires, so miles-per-thirty-second increases, prolonging the life of the tire even further.
Outsource your troubles
Staff, tools, shop space, liability, lack of recourse — these are only a few of the practical reasons to hand your tire management chores over to an expert.
Bill Guzick, vice president of business development for Michelin North Americas Truck Tires, says it's hard to find cost savings in tire maintenance because regardless of who is doing the work, the costs won't be that different.
“The value lies in relieving the fleet of that one challenge and leaving more resources to focus on the operation,” he says. “The other benefits are less tire-related downtime and fuel savings.”
Done effectively, a tire and wheel program should all but eliminate maintenance-related failures such as leaky valves, underinflation, tire wear related to poor mounting, etc.
And don't forget, you have recourse and warranty when someone else is responsible for shoddy work.
“Outsourcing your wheel/tire program is the best thing since sliced bread,” swears Terry Clouser, former director of maintenance at UPS and AAA Cooper, now retired after 27 years. “It's the way to go for large and small companies. Outsourcing reduces staffing needs along with a lot of the associated risk and exposure, and non-productive costs such as workers comp, possible OHSA citations, etc. It also reduces shop space, and the need for all that tire-related equipment.”
Protect your investment
Tires unfairly take the rap for a lot of vehicle condition issues. Irregular tire wear is almost always a signal that something is amiss upstream of the tire bead.
“Tires can tell you a lot about the condition of the vehicle,” says Tim Miller, Goodyear's commercial tire marketing communications manager. “Train your shop people to diagnose wear patterns so the problem can be caught early. In many cases, the preliminary signs of irregular wear will appear when the tire is fairly fresh - usually in the first 20% to 30% of its expected life. If you catch the wear early, the tire can often be salvaged by remounting it or moving it to another wheel position — maybe on another vehicle.”
Don't just scrap the worn tire, Miller advises. “If you just throw them on the scrap pile you're losing that link to what's going on with the truck. Once they are on the scrap heap, it's too late to identify the problem.”
Identifying the problem is just the first step. You have to remedy the condition that's eating the tires. Otherwise, the next tire you put on will suffer an untimely death as well.
Poor alignment, loose bearings, bad shocks, worn steering components and damaged suspensions are just a few items in the long list of things that kill tires, But if you've invested in premium tires, keeping the truck in top condition will prolong your investment.
Or, just order a truckload of Brand X skins and hone your tire mounting skills. You'll get pretty good at it sooner rather than later.
Inflation. Inflation. Inflation.
There is no better way to improve tire life - perhaps we should say prevent premature tire failure-than maintaining proper inflation pressure.
Proper internal pressure is required to support the load on the tire. “It is not the tire that supports the load, but the air inside the tire,” Goodyear'sTim Miller is fond of pointing out.
Without adequate pressure, excessive flexing of the sidewalls causes the casing to overheat and possibly explode leaving your investment scattered all over the highway.
Daily manual inflation pressure checks are unrealistic, and weekly inspections are often impractical, but you don't want to go out much longer than that. Allowing pressure check intervals to lengthen exponentially increases the risk of premature casing failure.
According to TMC's Recommended Practice 235A, “Tire Inflation Pressure Maintenance,” running a tire 20% under-inflated shortens its life by about 12%. Running tires 30% underinf lated shaves 30% off expected service life. It gets worse as pressure drops.
That same RP notes that a pressure differential of just 5 psi across the tires in a dual set creates a difference in circumference between the tires of up to 5/16 of an inch.The wider the pressure delta, the larger the difference in circumference.
Because two tires of different circumference will not cover the same distance over a given number of rotations, the smaller tire skids along the pavement as it keeps up with the larger tire. You might as well just take a buffing wheel to the tire.
If stretching your tire budget means getting every possible mile out of a tire, inflation management should be a top priority - regardless of how much everybody whines about it.