Trailer Talk

Aero Trailer could save $3,900 a year in Euro fuel, Daimler engineer says

September 19, 2012

SHARING TOOLS        | Print Subscribe
HANOVER, GERMANY - Thirty years of aerodynamic research is behind a streamlined semitrailer displayed this week at the huge Hanover truck show in Germany, says a Daimler Trucks executive who briefed a crowd of journalists on the efforts behind the vehicle.
Aero improvers on this Schmitz reefer trailer cut wind drag by 18% and improve fuel economy by 4.5%, says Daimler Trucks, whose research went into the design. It's on display this week and next at the IAA show in Hanover, Germany.
Aero improvers on this Schmitz reefer trailer cut wind drag by 18% and improve fuel economy by 4.5%, says Daimler Trucks, whose research went into the design. It's on display this week and next at the IAA show in Hanover, Germany.


Georg Weiberg, head of truck product engineering for Daimler, emphasized that the Aerodynamics Trailer was not a concept, but is a cargo hauler that could go to work now.

Like their counterparts in the U.S., Daimler engineers have been giving increased attention to aerodynamics as a way to cut air drag and save fuel. Tests have shown that this one gets impressive results.

ADVERTISEMENT

"Believe it or not, with the Aerodynamics Trailer we have reduced the total wind resistance for a semitrailer by a massive 18%, and this helps us reduce fuel consumption by 4.5% -- all without changing the slightest detail on the (basic) semitrailer," he said.

A "record run" showed the rig used less than 25 liters per 100 kilometers, the equivalent of 9.4 miles per gallon, he said. With a rig running 150,000 kilometers or 93,000 miles per year, it could save 3,000 liters (793 gallons) or 3,000 euros ($3,900) in current European diesel prices, he said.

"As an engineer, I can assure you of one thing: In the field of drive systems, you have to work for a very long time indeed, and spend a great deal of money, to achieve a major development advance" like this, he said. Engineers used knowledge of more than 30 years of research to design fairings that reduce the wind drag. They include:

- An "air dam," or gap sealer applied to the already short space between tractor and trailer on the usual European rig;

- Deep sideskirts, which Weimer called "trim panels," that keep air from reaching the trailer's undersides and also cover its wheels and landing gear;

- Short side-panel "wing" extensions at the rear; and

- A smoothly countoured "diffuser" that covers the rear underride guard and houses tail lamps.

The fiberglass and aluminum panels were applied to a standard 13.6-meter (44.6-foot)-long reefer trailer built by Schmitz Cargobull, a prominent trailer maker in Germany. The tractor is a Mercedes-Benz Actros cab-over-engine model with a StreamSpace cabin.

Testing in a full-scale wind tunnel, on tracks and on roads proved the fuel economy potential, Weiberg said. The side skirts produce the greatest single drag-reduction benefit, 8%.

This roughly corresponds to track testing done on skirted trailers in North America. The rear fairings leave the trailer's rear doors unhindered and it looks like they can be loaded by a standard forklift.

More road testing will be done after the truck show, and next year selected truck operators will test the tractor-trailer in actual service, Weiberg said.

Not so incidentally, European Union length restrictions currently would prohibit operation of the Aerodynamics Trailer on public roads. But an EU commission has approved a proposed allowance of 500 milimeters (19.7 inches) for aero improvers at a trailer's rear. Daimler hopes that will take effect later this year.

Such a waiver already exists in the U.S., where up to 5 feet can be used for rear aero improvers that bear no cargo weight. This allows use of appendages like the folding Trailer Tail, which is much longer than what Weiberg and his engineers have concocted.

Being a prototype, the Aerodynamics Trailer is heavy and expensive, he acknowledged. The extra equipment weighs 200 to 300 kilograms (440 to 660 pounds) and might cost 6,000 to 8,000 euros (about $7,800 to $10,000). Designers intend to bring down the weight by using lighter materials and cut the cost so the investment would be paid back in about two years.

Corrected 3:30 EDT 9/20 to indicate 30 years of research, not 20. We regret the error.


Comment On This Story

Name:  
Email: (Email will not be displayed.)  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Author Bio

Tom Berg

Senior Editor

Journalist since 1965, truck writer and editor since 1978. CDL-qualified; conducts road tests on new heavy-, medium- and light-duty tractors and trucks. Specializes in vocational and hybrid vehicles.

Sponsored by

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine