TRP has introduced an aftermarket brake program that offers brake linings for both 20,000- and 23,000-pound applications, helping operators comply with the newest truck, trailer and bus requirements.
"With the recent passage of more stringent stopping distance requirements and the emphasis that the Federal Motor Carrier Safety Administration places on brakes in its Compliance, Safety, Accountability program, the scrutiny on brake quality and adjustment has increased dramatically," said Jeff Hughes, TRP development manager.
TRP offers a range of remanufactured brakes engineered for medium- and heavy-duty trucks and trailers in many different applications, from city delivery to heavy-haul. The range also includes severe-service brake products for high-heat, high-duty-cycle applications like bus transport, refuse collection and construction.
TRP remanufactured brakes are engineered to perform to new-brake standards, at a significant savings over the cost of new brakes.
"Each grade is uniquely engineered and formulated to provide consistent braking performance and long lining life for specific applications," said Hughes. Single brake shoes and kits are available in 15-by-4-inch and 16.5-by-7-inch sizes for both tractors and trailers. All products offered in the TRP program meet FMVSS 121 standards.
In the 20,000-pound gross axle weight rating range, TRP offers three grades of friction material for single and tandem axles. Premium-grade friction material is engineered to handle high braking-duty cycles encountered in city pickup and delivery applications and where steep grades are also present. Standard-grade material is suited for on-highway, dry-freight, intermodal leasing and straight truck applications. Line-haul, or mid-grade material is suited for medium-duty, on-highway trailers, straight trucks and tractors.
In the 23,000-pound GAWR, premium-grade friction material is suited for high-duty cycles and mountainous terrains, while standard-grade friction material is suited for on-highway trailers and tractors. TRP also offers 23,000-pound severe-service-grade friction, designed to meet the demands of high-heat, high-duty cycle applications such as refuse, dump, mixer, tanker bus and off-road applications. It provides maximum lining life, superior stopping power and minimal fade.
Every TRP brake shoe is coined in a 1,000-ton press to ensure that it installs and performs perfectly. Each shoe also undergoes extensive surface preparation to guarantee adhesion of the paint coating and prevent rust-jacking damage.