Phillips Industries Releases Battery Status Indicator

January 2013, - Feature

SHARING TOOLS        | Print Subscribe
Phillips Industries has introduced the next generation of their V-Check battery status indictor, a simple device that gives an immediate signal of available battery power.

The V-Check II digitally monitors the state of power for any battery, particularly lift gate batteries, to ensure all work that needs to be performed can be performed. If the V-Check II signals less than optimum power, the battery can be charged before a situation occurs where battery power is required but not available.

The Phillips V-Check II features a large display surface for the digital read out of the battery state of charge. Both the voltage measurement and percentage of battery life remaining appear every 15 seconds.

The Go/No-Go LED light feature instantly shows if the battery is ready to complete the day's work. Green indicates available power 12.6V to greater than 15V, yellow between 12.4V and 12.5V and red below 9V and 12.3V.

It's simple to install and gives the vehicle operator information that is critical to minimizing downtime caused by lack of battery power to complete required tasks.

Phillips's new 12 volt V-Check II Battery Status Indicator, part number 60-9100, is available through Phillips authorized distributors.

Comment On This Story

Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.


We offer e-newsletters that deliver targeted news and information for the entire fleet industry.


ELDs and Telematics

sponsored by
sponsor logo

Scott Sutarik from Geotab will answer your questions and challenges

View All

Sleeper Cab Power

Steve Carlson from Xantrex will answer your questions and challenges

View All