A partnership between Fontaine Modification Company, Fyda Freightliner and GSP Marketing has produced a new, flexible refuse collection vehicle.


The MP8000/M2-106 Dual Stand-UP Drive Combo multi-purpose collection truck combines elements from all three companies:

* The maneuverable Freightliner M2-106 conventional cab chassis from Fyda Freightliner.
* The G-S Products productive semi-automated dual side-loader body from GSP Marketing.
* Fontaine Modification's dual low-entry stand-up drive cab.

The vehicle has been designed to allow two operators to efficiently collect and load material from both sides of the route. The Combo's dual stand-up cab offers low entry access on both sides, so two operators can enter and exit quickly. The cab can be equipped with dual steering, as well, for maximum flexibility. The MP8000 body has large 1.5 cubic yard receiving hoppers on both sides which enable the operators to independently load and dump carts, loose trash, compost, bagged trash or single-stream recycling.

The Combo has a lower upfront cost than low-cab-forward and drop-frame configurations. It offers excellent fuel economy, thanks in part to its lighter weight and small-block engine. The M2-106 chassis provides excellent conventional cab maneuverability paired with stand-up drive visibility.

The MP8000/M2-106 Dual Stand-UP Drive Combo debuted in the Freightliner Trucks booth at WasteExpo 2011 earlier this week. It is available with capacities ranging from 13 yd3 to 37 yd3 in single or tandem axle configurations. It is sold exclusively by GSP Marketing.


0 Comments