Article

Engine Smarts: SuperTurbo Project Could Increase Fuel Economy 5-7%

August 2010, TruckingInfo.com - Feature

by Commentary Steve Sturgess, Executive Editor

SHARING TOOLS        | Print Subscribe
An easily-missed announcement of a joint development program between Cummins and a start-up, VanDyne SuperTurbo, points the way to a future technology that could result in as much as 7 percent fuel savings for heavy trucks.
The agreement is part of the Super Truck program, a cost-sharing initiative between the Department of Energy and the private sector.

The key is the combination of the turbocharger, not only as a conventional inlet air charger, but also as a power-driven charger device -- hence the name SuperTurbocharger. It is also turbocompounded, combining a turbocharger and transmission. The key to its uniqueness and success is the constantly variable ratio for the gearing between the turbo and the power input/output shaft.

At low engine speeds the turbocharger is powered by the engine through the CVT, effectively acting as a supercharger and resulting in instant throttle response and enhanced torque. As the engine speeds up and the turbo spools up, it extracts power from the exhaust to both charge the inlet air and also to power the output shaft of the CVT to add to the crankshaft power.

This latter is turbocompounding, a technique used with great success on the latest Detroit Diesel engines, where it is responsible for some of the fuel economy gains of the new engines and is also in part for the fast response of the DD15 and DD16 to demands at the throttle pedal.

Cummins was awarded $39 million under the DOE Super Truck program to develop more fuel-efficient heavy-duty Class 8 trucks. The goal is to improve vehicle freight efficiency by 50 percent through advanced and highly efficient engine systems and vehicle technologies that meet prevailing emissions and safety requirements.

According to VanDyne SuperTurbo President and CEO Ed VanDyne, the Cummins development is timed for spring 2011 and will be on an existing engine platform that already meets 2010 emissions.

"We are anticipating a 5-7 percent efficiency gain when using the technology in association with a heavy-duty diesel engine," Van Dyne said in an interview. "This is nothing like the 36 percdent efficiency gain when used with a normally aspirated gasoline engine, but in commercial transportation a 5-7 percent gain represents savings of many thousands of dollars every year," he said.

So far there are two prototypes of the SuperTurbocharger running, one in the laboratory at Colorado State University and another with a passenger-car OEM in Europe. There, the dual attributes of the new SuperTurbocharger allow for a downsizing of the car engine by 50 percent with no loss of torque or performance.

In the announcement of the joint development, Don Stanton, principal investigator for Cummins' Super Truck program, is quoted: "Exploration of the VanDyne technology is an exciting complement to Cummins technologies portfolio to provide greater vehicle fuel economy and improved driveability." He added, "Our collaboration with VanDyne SuperTurbo exemplifies Cummins commitment to provide innovative engine technologies to meet fuel efficiency demands of the trucking industry."


Comment On This Story

Name:  
Email:  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine