Article

Wheels

March 2014, TruckingInfo.com - Editorial

Commentary: How Much do Your Technicians Know About Wheel Integrity?

By Rolf Lockwood, Executive Contributing Editor

Executive Contributing Editor Rolf Lockwood discusses wheel integrity and the importance of technicians being well-versed in the rules of fastening wheels properly.

Tags: FMCSA, CSA, Wheels, Wheel-offs, Technicians

March 2014, TruckingInfo.com - WebXclusive

Switching to Wide-Base Singles: Keys to Success

By Jim Park

Everything you need to know about switching from dual wheels to wide-base singles you can learn at a playground. What you need to know about wide-base tires, axles and offsets.

Tags: Tires, Meritor, Wheels, Dana, Axles, Wide-Base Tires

January 2014, TruckingInfo.com - Department

Keeping Your Wheels in the Game (updated)

Pictures are worth a thousand words, they say. What sort of a message do the wheels on this trailer convey about its owner?

By Jim Park

Back in 1984, the Occupational Safety and Health Administration issued a regulation requiring that truck wheels be stripped of rust and debris before mounting a tire. Easier said than done, the industry moaned at the time. Labor was less costly then, but wire brushes and elbow grease weren’t going to cut it.

Tags: OSHA, Goodyear, CSA, TMC, Tires, Wheels, IMI, Wheel refinishing, Maxion Wheel

December 2013, TruckingInfo.com - Department

Adopting Tire Inflation Systems

ATIS and TPMS do more than prevent good tires from coming apart. ROI also includes improved fuel economy, longer tread life and higher casing value.

By Jim Park

Why are adoption rates for proven fuel-saving technologies so low? It looks like a classic case of stepping over a dollar to pick up a dime. Maybe “a lack of credible information on payback” means, “we don’t know how much this device will save us so we’re not going to buy it.”

Tags: TPMS, Tires, Meritor, Wheels, PSI, ATIS, NACFE, Advantage PressurePro, Cascade Sierra Solutions, Aperia

November 2013, TruckingInfo.com - Department

Why Balancing is Important

By Jim Park

If you look at balancing from a life-cycle point of view, the value of extending tread life speaks for itself. There’s also casing integrity to consider, retreadability, and to a growing degree, and disposal costs. Yet reliable estimates suggest only about 20% of heavy-duty truck tires are ever balanced.

Tags: Tires, Wheels

November 2013, TruckingInfo.com - Feature

Getting the Lead Out of Tire Weights

True rotation of a several-hundred-pound mass and high speeds requires balancing, not just of the tire, but the entire rotating mass, including the hub, brake drum, wheel and tire.

By Jim Park

Beware the lead tire weight cops. They are out there and working in six states, with several more states looking at banning lead weights. Here's a look at the alternatives to lead in weights -- and alternatives to weights themselves.

Tags: Tires, Wheels

October 2013, TruckingInfo.com - Feature

Keeping Your Wheels On

A calibrated torque wrench is required to set the recommended torque on wheel fasteners. Over-torqueing with an impact wrench can stretch and weaken the studs.

By Jim Park

There’s no mystery to why wheels come off trucks. The National Transportation Safety Board in 1992, and Ontario’s Ministry of Transportation in the late 1990s, both concluded after exhaustive studies that inadequate maintenance was the root cause of a series of fatal wheel separation incidents.

Tags: TMC, NTSB, Tires, Wheels, Accuride, Timken, Spicer, ConMet, Ontario Ministry of Transportation, Wheel-offs

October 2013, TruckingInfo.com - WebXclusive

Why Do Wheels Come Off Trucks?

Drivers should be trained to inspect their wheels. Early detection can prevent a loose wheel from becoming a separation statistic.

By Jim Park

We don't hear many reports of wheel separations anymore, but that doesn't mean we have solved the problem. Reliable estimates suggest unplanned separations still occur at a rate of probably several per day. Exact numbers are hard to determine because many incidents go unreported.

Tags: Wheels, Province of Ontario, Ontario Ministry of Transportation, Wheel Fasteners, Wheel Separations

September 2013, TruckingInfo.com - Feature

Retreading Wide-base Tires

Most fleets could get a good trailer tire out of a third-generation retreaded tire.

By Jim Park

Wide-base tires aren’t cheap. Not that duals are cheaper, but in a single wide-base tire you have an investment approaching the cost of a pair of standard tires. Minimizing the life-cycle cost of those big wide tires almost demands that they be retreaded.

Tags: Wheels, In the Shop, Retreads, Wide-Base Tires

August 2013, TruckingInfo.com - Feature

Steer Axle Weights Have Increased: Are Your Steer Tires up to the Challenge?

Underrated steer tires can be hazardous. Steer axle loads approaching 13,000 pounds are not uncommon today.

By Jim Park

It’s not uncommon to find highway trucks with front axles and suspensions rated for 13,200 pounds. While 12,000-pound axles were the industry norm for many years, the move to 13,200-pound axles came with the addition of all that emissions reduction gear. Are you running a steer tire rated for that weight?

Tags: Goodyear, Michelin, Continental, Bridgestone, Wheels, Steer Tires, Steer Axles, Tires

July 2013, TruckingInfo.com - Feature

The Magic Number

Correct inflation pressure is dictated by weight, temperature and road speed – and the load and inflation tables.

By Jim Park

How do turtles mate? Why are women’s shirts buttoned on the left while men’s button on the right? How did they build the pyramids? How much air should I put in my tires? Unlike the pyramids, tire inflation needn’t be one of life’s little mysteries. Yet you may be inflating your tires TOO much.

Tags: Goodyear, Michelin, Bridgestone, Wheels, PSI, Tires

July 2013, TruckingInfo.com - Feature

Wheel-End Problems: Beyond the Obvious

Customers complaining that bad tires are suffering irregular wear? The problem may lie somewhere in the wheel-end. Photo by Jim Park.

By Jim Park

Wheel-ends function as a system: the spindle, hub, and rim (or wheel), as well as the bearings and the fasteners, all work in concert to keep the wheels in place and the tires running straight and true. If one part of the system is out of whack, the results will be seen and felt elsewhere in the system - usually at the tires themselves.

Tags: In the Shop, Tires, Wheels

May 2013, TruckingInfo.com - Feature

What You Need to Know About Wide-base Singles & Offset Axles

Wide-base single tires are popular for weight and fuel saving, but not everybody likes them. Spec'ing to revert back to dual tires at resale needs special consideration.

By Jim Park

Everything you need to know about switching from dual wheels to wide-base singles you can learn at a playground. Picture a teeter-totter with a big kid on one end and a little kid on the other. The big kid is on the ground, while the little guy's legs are dangling in the air. The load is unevenly distributed. If you moved the fulcrum closer to the big kid, the beam would eventually balance.

Tags: Tires, Wheels, Wide-Base Tires, Offset axles

March 2013, TruckingInfo.com - WebXclusive

Why You Should Consider Wheel Balancing

Tire wear associated with balance problems often appears as cupped channels along the tread face of the tire. (Photo: TMC)

By Jim Park

People will tell you that wheel balancing isn't necessary these days. Going back 10 or 20 years, new tires often needed a small amount of weight to balance out the irregularities in the old production process. With today's more exacting manufacturing standards, irregularities are the exception. But that doesn't mean you can't benefit from wheel balancing.

Tags: Tires, Wheels

January 2013, TruckingInfo.com - Feature

Accuride Says it's Nearly Done Fixing; Ready to Grow

Accuride has doubled its aluminum wheel production capacity.

By Deborah Lockridge, Editor in Chief

LAS VEGAS -- Rick Dauch, president and CEO of Accuride, has fielded a lot of questions -- or perhaps accusations would be a better word -- from distributors who want to know why his promises to support the aftermarket are any different from those of a string of executives befor

Tags: Business, Aftermarket, Wheels, Accuride

October 2012, TruckingInfo.com - Feature

Keep Tires Running Straight and True

By Jim Park, Equipment Editor

In tire and wheel mounting, the line between right and wrong is a thin one. A few thousandths of an inch on either side of correct can throw tires and wheels into a mean wobble or cause them to bounce up and down like pistons

Tags: Tires, Wheels, concentric mounting

« Previous1Next »

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by

Magazine