Article

Wheel-offs

March 2016, TruckingInfo.com - Editorial

Commentary: Wheel-Offs Again

Rolf Lockwood

By Rolf Lockwood

When it comes to wheel-offs, the mainstream press, and even some of the less well informed enforcement folk, always look to the driver first to find fault.

Tags: Maintenance, Vehicle Inspection, Tires, Wheel-offs

March 2014, TruckingInfo.com - Editorial

Commentary: How Much do Your Technicians Know About Wheel Integrity?

By Rolf Lockwood, Executive Contributing Editor

Executive Contributing Editor Rolf Lockwood discusses wheel integrity and the importance of technicians being well-versed in the rules of fastening wheels properly.

Tags: FMCSA, CSA, Wheels, Wheel-offs, Technicians

October 2013, TruckingInfo.com - Feature

Keeping Your Wheels On

A calibrated torque wrench is required to set the recommended torque on wheel fasteners. Over-torqueing with an impact wrench can stretch and weaken the studs.

By Jim Park

There’s no mystery to why wheels come off trucks. The National Transportation Safety Board in 1992, and Ontario’s Ministry of Transportation in the late 1990s, both concluded after exhaustive studies that inadequate maintenance was the root cause of a series of fatal wheel separation incidents.

Tags: TMC, NTSB, Tires, Wheels, Accuride, Timken, Spicer, ConMet, Ontario Ministry of Transportation, Wheel-offs

Previous||1||Next

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.

GotQuestions?

Lubricants

The expert, Mark Betner from CITGO, will answer your questions

View All

GotQuestions?

Transmissions

The expert, Brian Fletcher from Eaton, will answer your questions

View All